Replacement windows in Park City, Kansas

In Park City, the right window plan usually starts with your budget and your worst rooms, not a whole-house package. The housing here is a real mix — 1950s homes, manufactured homes and newer subdivisions — so the answer depends on which one you own. Get a planning range online, fix the openings that are actually failing first, and phase the rest if that suits your budget.

Pricing comes first here: an online planning range, then a written estimate, and a measurement visit only if you want one.

What kind of Park City home do you have?

Census figures show how mixed the housing is. The median Park City home was built in 1988, but nearly 18% of homes date to the 1950s — the single largest decade — and about 13% of housing units are mobile homes.

1950s and 1960s houses. Expect older aluminum or single-pane windows, or a patchwork of replacements from different decades. The comfort gain from replacing these is usually real. If original painted trim or sashes will be disturbed, homes built before 1978 fall under the EPA's lead-safe renovation rule, and paid contractors must be certified for that work.

1970s–1990s houses. Often on their first or second set of windows. Look for fogged glass, tired weatherstripping and locks that no longer pull the sash tight.

Newer subdivision homes. Usually double-pane Low-E from the builder. Replacement here is about failed seals or a hot west room, not age.

Manufactured homes. A different job entirely — see below.

Can you replace windows in a manufactured home?

Yes, but measure before you shop. Windows in manufactured homes are often sized and mounted differently from site-built houses, and the wall depth can be thinner, so a standard replacement unit may not fit the opening or the trim.

Before any manufactured-home quote is accepted:

• Measure every opening and note how the existing window is attached.
• Confirm the replacement product is made for that wall type.
• Ask whether interior and exterior trim is included or reused.
• Check your community's rules if the home is in a park.

A quote that assumes standard sizes without anyone measuring isn't a real quote yet.

How do I phase a window project in Park City?

Phasing is a reasonable way to spread cost, as long as each phase is planned so later windows still match. A typical order:

Ask for the product series and color in writing at phase 1 so the same window can be ordered later. Two smaller, well-planned projects beat one oversized project you didn't need.

What should I do after hail in Park City?

Park City sits just north of Wichita in Sedgwick County, in the same storm track as the rest of the metro. During the September 3, 2025 storms, the National Weather Service recorded a media report of golf ball–size hail in Park City.

After a storm:

• Cracked or broken glass is a clear functional problem — cover it and document it.
• New fogging after impact can mean a damaged seal; note the date it appeared.
• Torn screens and dinged trim are often repairable without replacing the window.
• Water at the sill needs a prompt look; the window may not be the only leak.

Check your deductible before filing. A storm-chaser's "full replacement" estimate isn't the same as an assessment of what's actually damaged.

Do I need a permit to replace windows in Park City?

Ask the city before you order. Park City's building permit application lists "Replacement" and "Repair" among the types of work, asks for the general contractor's license number, and requires a site plan and floor plan drawing with the application. It also states the permit is void unless work starts within 180 days.

The city licenses building contractors separately — the forms are on its Licensing & Permits page — and inspections are booked through its Schedule an Inspection page. For questions, the page directs you to the Planning Department at (316) 744-2026 ext 208.

When you call, describe:

• how many windows, and whether frames stay or come out
• any opening that changes size
• any bedroom window that changes size or operating style

Your quote should say who pulls the permit, who schedules the inspection and who keeps the records. Compare those lines between bidders with our guide to reading a window quote in Wichita, and see what replacement windows cost in Wichita for what moves the price.

Nearby city guides

• Wichita replacement windows
• Bel Aire replacement windows
• Newton replacement windows
• All service-area guides

Frequently asked questions about replacement windows in Park City

Can I get an estimate for my Park City home now?

Yes — answer five questions in the free estimator and you'll see a planning range in about a minute. When you're ready, send your details for a written estimate built around your openings.

Can I replace just a few windows instead of the whole house?

Yes, and in Park City that's often the smartest move. Start with safety problems and the worst rooms, then plan later phases with the same product line so everything matches.

Do manufactured homes need a different kind of window?

Often. Sizes, mounting and wall depth can differ from a site-built house, so every opening should be measured and the product confirmed for that wall before anything is ordered.

My Park City house was built in the 1950s. Is replacement worth it?

If you still have original single-pane or aluminum windows, the comfort difference is usually noticeable. If the house was built before 1978 and painted surfaces will be disturbed, the work has to follow lead-safe practices.

Does Park City require a permit for replacement windows?

The city's building permit application includes replacement and repair work and asks for site and floor plan drawings. Call the Planning Department with your exact scope before ordering.